Installation and operating manual for WATERFRIEND -Chlorine MRD-3 Page 34
Automatic IP address configuration (DHCP)
For a simplified connection of the device to the local network automatic IP configuration via DHCP can be
used.
Procedure:
Press the
key
1. Select Service functions
2. Press the key
in the key bar
3. Select network settings
4. Activate or deactivate the function IP address automatic.
Factory setting: DHCP active
Manual IP address configuration
If the IP addresses are not configured automatically via DHCP, they can be set manually with this function.
Procedure:
Press the
key
1. Select Service functions
2. Press the key
in the key bar
3. Select network settings
4. Set the IP addresses required fort he local network manually using the function IP address
manually.
PIN-Numbers
With this function, the PIN numbers for the operation of the device via the network interface can be set.
Procedure:
Press the
key
1. Select Service functions
2. Press the key
in the key bar
3. Select network settings
4. Use the LAN-PIN function to set the desired PIN numbers (4 digits) for users and service
technicians (Expert Mode). The Service PIN can only be changed in expert mode. If the PIN is set to
0000, the control can be operated over the LAN interface without a PIN authorization.
Factory setting: LAN-Pin=1234, Service-PIN=5678
Language selection
For the indications on the display several languages can be selected.
Procedure:
Press the
key
1. Select Service functions
2. Press the key
in the key bar
3. Select Language
4. Select the desired language.
