Installation and operating manual for WATERFRIEND -Chlorine MRD-3 Page 30
Operating protocol
The WATERFRIEND offers the opportunity to view the saved log in short
form on the display.
Procedure:
Press the
key
Select Protocol of events
Using the keys
and
, the calender week to be displayed can be
selected. The keys
and
can be used to flip the log pages.
Manual operation
The WATERFRIEND provides the ability to manually turn on the
metering pumps to vent the dosing tubes or perform a shock chlorination.
Procedure:
Press the
key
Select Hand dosage
Venting the dosing tubes
Shock chlorination
By pressing the appropriate button each dosing pump can be switched
on and off. The respective status indicator is to be observed. The
maximum duration is limited to 60 seconds. After this time, the pump will
automatically turn off. The remaining time is shown on the display (in
seconds).
The third pump (option) can only be controlled in manual mode when it is configured for pH +.
Flocculation (Option)
The WATERFRIEND offers the optional ability to perform automatic flocculant dosage with a third metering
pump.
Setting the capacity of the flocculation pump
Procedure:
Press the
key
1. Select Flocculation settings
2. Select capacity flocculation pump
The current value is shown on the left side of the display.
