Installation and operating manual for WATERFRIEND -Chlorine MRD-3 Page 21
To adjust this value, the following two options are available:
a) PLUS / MINUS keys
•
By pressing the arrow keys
or
, the value can be
modified stepwise.
•
Press
to store the new setting.
b) Keyboard
The value can also be set directly by using the keyboard on the
right side of the display:
•
enter the desired value
•
Press
to store the new setting.
Factory setting: 1,5 l/h Range: 0,2 to 10,0 l/h
Chlorine regulation
In this menu you can adjust various settings of the chlorine control.
Switching chlorine regulation off or on
Procedure:
Press the
key
1. Select Chlorine settings
2. Select Operating mode
3. Select Operation mode OFF or Operation mode Auto
The selected setting is stored automatically.
Factory setting: Operation mode AUTO
Setting the chlorine target value
There is a setting facility for the desired chlorine value in the menu.
Procedure:
Press the
key
1. Select Chlorine settings
2. Select Setpoint
The current value is shown on the left side of the display.
To adjust this value, the following two options are available:
a) PLUS / MINUS keys
•
By pressing the arrow keys
or
, the value can be
modified stepwise.
•
Press
to store the new setting.
b) Keyboard
The value can also be set directly by using the keyboard on the
right side of the display:
•
enter the desired value
•
Press
to store the new setting.
Factory setting: 0,45
Range: between the lower and the upper alarm limit
