oset 2012 12.5 24V, Общее техническое обслуживание, руководство по устранению электрических неисправностей и диагностике

Страница: 12 / 31

2.2 – Correct chain line can be seen (above left). It is very important to ensure the rear wheel is located square in
the swing arm to enable the rear sprocket to run directly inline with the front sprocket. The tension of your chain
can be adjusted via the chain tugs located on the rear axle (above right). Tip – correct chain tension can be found
by locating your finger and thumb on the top and bottom of the chain just in front of the chain cover mounts. You
should be able to squeeze the chain together by 1-2mm. If your rear and or front sprocket is damaged or worn,
your chain is twisted or stretched then you will need to replace them.
12