oset 2012 12.5 24V, Общее техническое обслуживание, руководство по устранению электрических неисправностей и диагностике

Страница: 27 / 31

4.3 – Your controller unit is located on the top tube of the frame. It connects directly with the throttle (via both 3
pin white connector & small 2 pin black connector), the motor, (large white connector Green & Blue wires), the
wire harness (large white connector red & black wires), the potentiometer (via small back two pin connector – x2
white wires), & one side of the key switch (via small two pin connector – small single back wire). Before assuming
the highly unlikely scenario of your controller not functioning, rule out connections problems first.
27