oset 2012 12.5 24V, Общее техническое обслуживание, руководство по устранению электрических неисправностей и диагностике

Страница: 16 / 31

2.3 – Cable operated mechanical disc brakes - cable
tension adjustment can be made via the barrel
adjustment on the lever and at the calliper. Lever
reach adjustment can be seen above by using a
2.5mm Allen key. Again always ensure that before you
make any adjustment the wheel is sitting square in
the fork dropouts and that the quick release system is
firmly secured. Spin the wheel to check the disc is
running true.
Note if you have signs of uneven pad wear, i.e. you
can see areas of the disc that is not making contact
with the pad, then check the alignment of the calliper
ensure you have 1-2mm gap each side of the disc
rotor.
16