oset 2012 12.5 24V, Общее техническое обслуживание, руководство по устранению электрических неисправностей и диагностике

Страница: 24 / 31

Symptom Component
Check Order Notes Solution
3. Battery
Not
Charging
(cont).
3.6. Wiring
Harness
This is the component that is effectively the loom,
connecting from the battery terminals themselves right
through to the relay and controller. Current feeds from the
charge port into this and then onto the batteries. Anything
that could block the flow of current will result in the
batteries not charging. Check the fuse in the holder and
ensure the connection is tight, ensure also that the spade
connectors on the terminals create a secure fit with the
battery. Once all of this is checked and you have ruled out
all of the above, it is possible that the diode built into the
harness is no longer allowing current to flow from the
charger.
1. Order a new wiring
harness. Ensure you have
the year of manufacture of
your OSET to hand, as our
sales department will need
this to designate you the
correct replacement.
24