OPERATING & INSTALLATION INSTRUCTIONS FOR STRATFORD CF ZERO CLEARANCE WOOD HEATER
27
5.2.5
Flue system Fire
Regular flue system maintenance and inspection can prevent flue system fires. If you have a flue system
fire, follow these steps:
1.
Close the zero clearance wood inbuilt door and the air intake controls;
2.
Alert your family of the possible danger;
3.
If you require assistance, alert your fire department;
4.
If possible, use a dry chemical fire extinguisher, baking soda or sand to control the fire. Do not use water
as it may cause a dangerous steam explosion;
5.
Check outside to ensure that sparks and hot embers coming out of the flue are not igniting the roof;
6.
Do not use the zero clearance wood inbuilt again until your flue system and zero clearance wood inbuilt
have been inspected by a qualified flue system sweep or a Fire Department Inspector.
PART B – INSTALLATION
Install the zero clearance wood inbuilt only as described in these instructions.
Parts Required
•
Stratford CF
-
Flue lengths
-
Elbows (where necessary)
-
Hot air gravity distribution kit
-
Fresh air
-
Associated components as per these installation instructions.
6
SAFETY INFORMATION
6.1
Summary of Installation Cautions and Warnings
•
THE INFORMATION GIVEN ON THE CERTIFICATION LABEL AFFIXED TO THE APPLIANCE ALWAYS
OVERRIDES THE INFORMATION PUBLISHED, IN ANY OTHER MEDIA (OWNER’S MANUAL,
CATALOGUES, FLYERS, MAGAZINES AND/OR WEB SITES).
•
MIXING OF APPLIANCE COMPONENTS FROM DIFFERENT SOURCES OR MODIFYING COMPONENTS
MAY RESULT IN HAZARDOUS CONDTIONS. WHERE ANY SUCH CHANGES ARE PLANNED, STOVE
BUILDER INTERNATIONAL INC. SHOULD BE CONTACTED IN ADVANCE.
•
ANY MODIFICATION OF THE APPLIANCE THAT HAS NOT BEEN APPROVED IN WRITING BY THE TESTING
AUTHORITY IS CONSIDERED AS BREACHING AS/NZS 4013.
