ADJUSTMENT
DOOR
HANDLE PIN
(FLAT SIDE OF “D”
SHAPE INWARDS)
FLAT
WASHER
LOCK WASHER
ADJUSTMENT
FPWI3 FACEPLATE KIT & H336-WI DOOR KIT
INSTALLATION INSTRUCTIONS
:ROI6WHHO/WG1DSROHRQ5G%DUULH21/0*&DQDGD ID[ ZZZQDSROHRQILUHSODFHVFRP
W415-0696 / B / 10.18.11
TEMPLATE
1
1. Assemble the air control arm by removing the 2nd screw,
rotating the arm in line and re-installing the screw.
2. Install the ash lip.
3. Install the faceplate, ensure the air control arm fi ts through
the air control slot and operates smoothly.
FRONT ARCHED
PANEL X 7
AIR
CONTROL
SLOT
ASH LIP X 3
AIR CON
TR
O
L
A
R
M
+ -
+
-
2
**
X 2
**
**
Install hardware as illustrated.
NOTE: Doors may need to be adjusted to ensure
a good seal around fi rebox.
LEFT DOOR ASSEMBLY
RIGHT DOOR ASSEMBLY
**
The fi nal angle of the left door handle should mirror the right
door handle in the closed position. Tighten the nut to secure
the handle at the desired angle.
1
(Once all the fi nishing facing material has been installed).
Remove the screws and template, and discard.
NOTE: The faceplate
is shipped with the
upper and lower grills
assembled. Remove
both grills before
proceeding.
2
3
Do not over tighten.
Handle must rotate
freely.
