OPERATING & INSTALLATION INSTRUCTIONS FOR STRATFORD CF ZERO CLEARANCE WOOD HEATER
57
6.
Insert a cotter pin in the last
hole on the right side of the
tube. Then bend the tabs on
the pin to keep in place.
7.
Repeat
steps 4, 5
and
6
for the
two tubes in the back then
install the baffle. Then, install
the two front tubes.
8.
To remove the tubes use the
above steps in reverse order.
Note that
secondary air tubes can be replaced without removing the baffle board.
Important Notes:
The air tubes are identified for placement as follows:
Model
Type of tube
Stratford CF fireplace
Front
►
95 holes of 3.581 mm
Middle front
►
67 holes of 3.175 mm
Middle rear
►
67 holes of 2.768 mm
Rear
►
67 holes of 2.565 mm