
6
GETTING READY
-
Connect the power cord to the power socket. Make sure that the voltage is suitable for the
instrument.
-
Turn the power on by pushing the On/Off switch on the lower right cheek block. To turn the
power off push the On/Off button again.
-
Move the Master Volume slider half way to have a reasonable volume for the use. Moving the
slider upward it will increase the volume, moving it downwards it will decrease the volume.
-
The Master Volume slider controls the volume of the speakers, of the headphones (located
below the lower keyboard on the left side) and of the Line Out jacks (located in the rear panel).
INTRODUCTION
Welcome to the world of electronic musical instruments. Your instrument has been designed and
manufactured using the latest technology and computerized systems, to offer you years of trouble free
pleasure. Read this manual carefully in order to fully exploit the potential of your instrument.
GETTING STARTED – THE BEGINNERS GUIDE
When your instrument is first switch on it will default to an organ sound. To play as an organ no
controls at all have to be selected. You simply are able to sit and play. To enable ease of use from the
outset, there are many automatic registrations and sounds built into the instrument.
OVERALL PRESETS
Overall Presets are combinations of sounds and features that have been set up beforehand at the factory.
There are 6 Overall Presets, which can be selected using the Overall Preset buttons at the bottom right
hand side of the control panel. The Overall Presets can be changed. The factory settings are as follows:
1
Electronic Organ 1
2
Theatre Organ
3
Jazz Organ
4
Mantovani Strings
5
Solo Piano
6
Jazz Combo
The 6 Overall Presets provide registrations that will suit many music styles.