
54
MASTER MODE
When using this setting the keyboard will communicate in all the 16 midi
channels, if set, only with corresponding Midi Channels.
PIANO MODE
It will be possible with this setting to drive the Accompaniment and the Melody
parts of the GT2600 with only 1 midi channel. Typical application is a Digital
Piano with no split point.
The Split point will be provided by the organ:
1. Press the SET button. All the programmable features of the instrument will
start flashing.
2. Press the Midi button 5 times. Its Led will start flashing and the display will
show:
PIANO MODE SET
Split = A#3
To change or set the Split Point use the (/\) and (\/) buttons to select the desired
note or simply press the desired note on the keyboard.
To store the new Split Point setting, press the SET button.
When in PIANO MODE it is also possible to select the FULL KEYBOARD MODE, that enables you
to play chords in the full keyboard using the MELODY section of the instrument in the full keyboard.
PIANO MODE SET
Split = A#3
When in the above page select the FULL KEYBOARD MODE using the (/\) and (/\) DATA buttons
and the display will show:
PIANO MODE SET
Full Keyboard
By pressing the midi button a second time, the display shows:
IN Ch PC CC
Rt_1 1 on on
In this page it is possible to determine the
Midi In
channel number for each section. It is also possible
to set the Program Change On/Off and the Control Change On/Off. The last page of Midi In is the
GENERAL CONTROL (CTRL) Channel page.
IN Ch PC CC
Ctrl 16 on on