Orion SynScan V5 Hand Control Скачать руководство пользователя страница 40

Страница: 40 / 48

•

Use the left and right keys to move the cursor and use the numeric keys to fill the dig

its with the cursor. Press the

ENTER

key to end setting the exposure time.

• Now the screen is changed to set the frames to be shot for this group, as shown be-

low. Use the left and right keys to move the cursor and use the numeric keys to fill in

the digits with the cursor. Press the

ENTER

key to end setting the frames.

After setting all groups of the parameters, press the

ESC

key to exit the configuration pro

cess.

Edit Group#1
Repeats 000

PART XI : ADVANCED FUNCTIONS

Set the camera to bulb exposure mode.

Press the “

UTILITY

” shortcut key, access to the sub-menu “

Camera Control \ Shoot

”, and

press the

Enter

key.

The SynScan hand control will start to take batch exposure and display the progress data

on the screen, a sample screenshot is shown below:

•  The top row shows the group index and the frames pending.
•  The bottom row shows the remaining exposure time of the current frame.
•  At the end of each frame, the SynScan hand control will wait for the preset interval

before the next exposure.

Batch Exposure

During the batch exposure, users can press the

ESC

key to suspend the operation. The

screen will display “

Shoot Suspended. 1) Resume 2) Exit

”. Press “

” key to resume batch

exposure or press “

” key to exit.

Shoot Suspended
1) Resume 2) Exit

Shooting#1: 003
Released mm:ss

• The SynScan hand control will return to the status of

Step 2

for users to choose and

edit another group of parameters.

Note:

To disable a group, set either the “

Exposure

” or the “

Repeats

” parameters to

Содержание SynScan V5 Hand Control
















































Результаты поиска

Содержание SynScan V5 Hand Control

Отзывы:

Похожие инструкции для SynScan V5 Hand Control

Бренды по названию

Популярные бренды

Orion SynScan V5 Hand Control, Инструкция по эксплуатации

Результаты поиска

Содержание SynScan V5 Hand Control

Отзывы:

Похожие инструкции для SynScan V5 Hand Control

Бренды по названию

Популярные бренды