Orion SynScan V5 Hand Control Скачать руководство пользователя страница 7

Страница: 7 / 48

PART II : INITIALIZATION

• Tripod head is leveled.
• R.A. axis points towards the Northern Celestial Pole (in Northern Hemisphere) or the

Southern Celestial Pole (in Southern Hemisphere).

• Counterweight rod is at its lowest position.
• The telescope points towards the Northern Celestial Pole (in Northern Hemisphere) or

the Southern Celestial Pole (in Southern Hemisphere).

The mount should be set up as close as possible to the following home position:
• Mount base is leveled.

• The telescope tube is leveled and points towards the true north (not magnetic north).

Once the mount has been setup to the home position, the user can turn on the power to the

mount and start the initialization process on the SynScan hand control. The following is the

steps:

Home Position of an Equatorial Mount:

Home Position of an Alt-azimuth Mount:

2.1 Setup the Home Position of the Telescope Mount

2.2 Initialize the Hand Control

Before powering on the telescope mount, it should be set up to a particular home position. The

home position differs between an equatorial mount and an Alt-azimuth mount.

A SynScan hand control with firmware version 3.32 or later supports both an equatorial

mount and an alt-azimuth mount. It can detect the model of the mount it is connected to

and select the appropriate operation mode.
For an equatorial/Alt-azimuth dual-mode mount, such as the AZ-EQ6 GT mount, the Syn-

Scan hand control will require the user to choose the mount’s operating mode.

• The LCD screen will display “

Operating Mode

” in the first line.

• Use the scrolling keys located at the bottom left and right of the keypad to choose be-

tween Equatorial mode (

EQ Mode

) and Alt-azimuth mode (

AZ Mode

• Press

ENTER

to confirm the selection.

Select the Operation Mode of the Mount

The hand control will display the firmware version.

• Press

ENTER

to proceed to the next step. Press

ESC

to return to the previous step.

• Users can slew the mount with direction keys in this step.

Firmware Version Display

The hand control will display a warning message about the dangers of viewing the sun with

a telescope.
• Press

ENTER

to confirm you have read the warning messages and proceed to the next

step. Press

ESC

to return to the previous (firmware version display) step.

• Users can slew the mount with direction keys in this step.

Warning Message Confirmation

Содержание SynScan V5 Hand Control
















































Результаты поиска

Содержание SynScan V5 Hand Control

Отзывы:

Похожие инструкции для SynScan V5 Hand Control

Бренды по названию

Популярные бренды

Orion SynScan V5 Hand Control, Инструкция по эксплуатации

Результаты поиска

Содержание SynScan V5 Hand Control

Отзывы:

Похожие инструкции для SynScan V5 Hand Control

Бренды по названию

Популярные бренды