Orion SynScan V5 Hand Control Скачать руководство пользователя страница 28

Страница: 28 / 48

PART VII : CONFIGURE THE HAND CONTROL

7.1 Display and Keypad

7.2 Alignment Star Filter

7.3 Sorting the Alignment Star List

Access the menu “

Setup \ Handset Setting

” and press the

ENTER

key.

Use the scroll keys to select “

LCD Contrast

”; then use the left/right direction keys to adjust

the contrast of the LCD screen.

Use the scroll keys to select “

LED Backlight

”; then use the left/right direction keys to adjust

the brightness of the keypad’s LED backlight.

Use the scroll keys to select “

LCD Backlight

”; then use the left/right direction keys to adjust

the brightness of the LCD screen’s backlight.

Press

ESC

to exit the adjustment.

Access the menu “

Setup \ Alignment Stars \ Sort by

” and press the

ENTER

key.

Use the scroll keys to select “

Magnitude

” and press the

ENTER

key to sort the list by mag-

nitude (from the brightest to the faintest).

Use the scroll keys to select “

Alphabet

” and the press the

ENTER

key to sort the list alpha-

betically.

• The alignment star’s altitude must be above 15 degrees.
• For an equatorial mount, the alignment star’s declination must be between -75 and +75

degrees.

• For an alt-azimuth mount, the alignment star’s altitude must be below 75 degrees or

within

the altitude limits defined by the user

(Section 6.3)

Not all combinations of alignment stars are good for a 2-star alignment or 3-star alignment.

The SynScan hand control uses a built-in advanced alignment star filter to show only the stars

which are suitable to work with the 1

or 2

alignment star(s), when asking the user to choose

the 2

or 3

alignment star. It helps to improve the success rate of the alignment.

Some advanced users or those who have limited visible sky can turn on/off this advance filter

with the following steps:

Access the menu “

Setup \ Alignment Stars \ Adv. Filter

” and press the

ENTER

key.

Use the scroll keys to choose “

OFF

” and then press the

ENTER

key to disable the filter.

Use the scroll keys to choose “

” and then press the

ENTER

key to enable the filter.

Note:

Even if the advanced filter function is turned off, the SynScan hand control will still

apply

the following rules to generate the list of alignment stars:

7.4 Naming of Stars

Access the menu “

Setup \ Alignment Stars \ Set Star Name

” and press the

ENTER

key.

Use the scroll keys to choose between “

Common Name

” and “

Bayer Designation

”, press the

ENTER

key to confirm

Содержание SynScan V5 Hand Control
















































Результаты поиска

Содержание SynScan V5 Hand Control

Отзывы:

Похожие инструкции для SynScan V5 Hand Control

Бренды по названию

Популярные бренды

Orion SynScan V5 Hand Control, Инструкция по эксплуатации

Результаты поиска

Содержание SynScan V5 Hand Control

Отзывы:

Похожие инструкции для SynScan V5 Hand Control

Бренды по названию

Популярные бренды