Orion SynScan V5 Hand Control Скачать руководство пользователя страница 20

Страница: 20 / 48

PART IV: SYNSCAN MENU TREE

The SynScan hand control’s menu is only accessible after the initialization, or after the star

alignment routine is completed (If it is chosen to start). Users can use the

ESC

key, the

ENTER

key, and the two scrolling keys to access the menu.

The functions of these keys are:

•

ESC

key: Used to return to the previous menu or to exit the current operation. Press the

ESC

key for several times to go back to the top level of the menu structure.

•

ENTER

key: Used to enter a sub-menu or to start the operation of the end level menu.

•

Scroll keys

: Used to scroll within the same level sub-menu.

The SynScan hand control provides short-cut keys for accessing the most commonly used

sub-menu. The short-cut keys may only be used while the hand control is in stand-by mode,

that is, the SynScan hand control is not executing a specific operation. Users can always

press the

ESC

key to quit the current operation if the short-cut keys are not accessible.

Here is the list of the short-cut keys and their functions:

•

MENU:

Access to the “

SETUP

” sub-menu.

•

TOUR:

Access to the “

Deep Sky Tour

” function.

•

UTILITY:

Access to the “

UTILITY FUNCTION

” sub-menu.

•

Access to the “

Messier Catalog

” sub-menu.

•

NGC:

Access to the “

NGC Catalog

” sub-menu.

•

IC:

Access to the “

IC Catalog

” sub-menu.

•

PLANET:

Access to “

SOLAR SYSTEM

”.

•

OBJECT:

Access to the “

OBJECT LIST

” menu and stay at the “

Named Star

” sub-menu.

•

USER:

Access to the “

USER OBJECT

” sub-menu.

•

ID:

Access to the “

Identify

” function.

4.2 Accessing Menus

4.3 Short-cut Keys

Содержание SynScan V5 Hand Control
















































Результаты поиска

Содержание SynScan V5 Hand Control

Отзывы:

Похожие инструкции для SynScan V5 Hand Control

Бренды по названию

Популярные бренды

Orion SynScan V5 Hand Control, Инструкция по эксплуатации

Результаты поиска

Содержание SynScan V5 Hand Control

Отзывы:

Похожие инструкции для SynScan V5 Hand Control

Бренды по названию

Популярные бренды