Orion SynScan V5 Hand Control Скачать руководство пользователя страница 15

Страница: 15 / 48

PART III : ALIGNMENT

The LCD screen displays “

Choose 1

Star

” in the first line. Use the scrolling keys to browse

through a list of star names and Press

ENTER

key to pick the one on the screen as the 1st

alignment star.

Now the screen will display “

Point scope to ZZZ.Z’ TT.T’

”, which means point the telescope

to the direction with an azimuth of ZZZ.Z degrees and an altitude of TT.T degrees. This is

also the direction of the selected 1

alignment star. Users can use the direction keys on the

SynScan hand control to move the mount to point the telescope to the star and center it in

the FOV of the finder scope or the red dot finder, and then press

ENTER

key to proceed to

the next step.

If the telescope has clutches on its axes, user can loosen the clutches to move the mount

manually to point the telescope to the target.

Now the screen will display “

Ctr. to eyepiece..

” and the name of the selected 1

alignment

star. The star should have been in the FOV of the telescope. User can use the direction

keys to center it in the eyepiece and then press the

ENTER

key to proceed to the next step.

3.5 Alt-Azimuth Mounts using

2-Star Alignment Method

Aligning the 1

Star:

Aligning the 2

Star:

The LCD screen displays “

Choose 2nd Star

”. Use the scrolling keys to browse through a

list of star names and press

ENTER

to pick one on the screen as the 2

alignment star. The

mount will then automatically slew and point the telescope towards the 2

alignment star

in the sky.

After the mount stops, the hand control will display the name of the selected 2nd alignment
star and “

Ctr. to eyepiece..

”. The telescope should point rather closely to the 2

alignment

star (generally, in the FOV of the finder scope.)

Now users can use the direction keys to move the telescope to align with the 2

alignment

star. To align, center the 2

alignment star in the FOV of the finder scope, and then center

it in the FOV of the telescope’s eyepiece. Press

ENTER

key to confirm centering of the star

and proceed to the next step. Generally, users can use Rate 5 or 6 to center the star in

finder scope and use Rate 2 or 3 to center the star in the telescope’s eyepiece.

The SynScan hand control will now display “

Alignment Successful

”. Press

ENTER

to skip

extra messages and complete the alignment process.

Cancelling the Alignment Process:

While the mount is slewing during alignment, users may press the

ESC

key to stop the

mount. The hand control screen will display “

MOUNT STOPPED!! Press any key…

”

Press any key and the SynScan hand control will ask the user to select another alignment

star.

Press the

ESC

key again; the LCD screen will display “

Exit Alignment? 1) YES 2) NO

”. Press

key

to exit the alignment process; press key

to go back to choose an alignment star.

Содержание SynScan V5 Hand Control
















































Результаты поиска

Содержание SynScan V5 Hand Control

Отзывы:

Похожие инструкции для SynScan V5 Hand Control

Бренды по названию

Популярные бренды

Orion SynScan V5 Hand Control, Инструкция по эксплуатации

Результаты поиска

Содержание SynScan V5 Hand Control

Отзывы:

Похожие инструкции для SynScan V5 Hand Control

Бренды по названию

Популярные бренды