Orion SynScan V5 Hand Control Скачать руководство пользователя страница 37

Страница: 37 / 48

PART XI : ADVANCED FUNCTIONS

Here are the instructions on using the PAE function:

Perform a 1-star alignment, 2-star alignment, or a 3-star alignment.

Choose a celestial object in a zone of interest as reference by referring to a sky map or

planetarium software. In general, it is a rather bright star, but users can also use other

objects. Use the SynScan hand control to control the mount to point the telescope to the

reference object.

Use one of the following operations to start the PAE calibration:
• Press the “

UTILITY

” shortcut key, access to sub-menu “

PAE\PAE Correction

”, and then

press the

ENTER

key.

• Press and hold the

ESC

key for two seconds.

The screen will display “

Re-centering Obj.:

” in the first row, and display the name of the ref

erence object in the bottom row. (If the last object is launched from a PC, then instead of

the name of the reference object, it will display “

The last target

”.) Now use the direction keys

of the hand control to center the object in the telescope’s FOV, and then press

ENTER

confirm. Remember to end the centering operation by pressing the

Right

and

direction

keys together.

Repeat

Step 2

for viewing different portions of the sky.

Note:

• Whenever the SynScan hand control locates an object, it will automatically check whether

any PAE calibration data is available, and apply the compensation accordingly. No manual

intervention is required.

• If multiple PAE calibrations are performed in the same zone, the previous calibration data

will be overwritten.

• Users can access the menu “

UTILITY FUNCTION > PAE > Clear PAE data

” to clear all PAE

calibration data.

• The PAE calibration data will be automatically cleared after a

1-star alignment

2-star

alignment

3-star alignment

The polar alignment function can help users to polar align an equatorial mount accurately.

Here are the operating instructions:

11.3 Polar Alignment without Polar Scope

Complete a 2-star alignment or a 3-star alignment. At the end of the alignment, the Syn-

Scan hand control will display the polar alignment error

(refer to Section 3.3)

. Users can

use the data to determine whether it is necessary to adjust the polar alignment.

Press the “

” shortcut key, and then access to sub-menu “

Alignment\Polar Alignment

”,

press the

ENTER

key to proceed to the next step.

The screen will display “

Select a Star

”.

Содержание SynScan V5 Hand Control
















































Результаты поиска

Содержание SynScan V5 Hand Control

Отзывы:

Похожие инструкции для SynScan V5 Hand Control

Бренды по названию

Популярные бренды

Orion SynScan V5 Hand Control, Инструкция по эксплуатации

Результаты поиска

Содержание SynScan V5 Hand Control

Отзывы:

Похожие инструкции для SynScan V5 Hand Control

Бренды по названию

Популярные бренды