Orion Diagnostica QuikRead go, Руководство пользователя

Страница: 15 / 136

15
Picture 13 Power save
GETTING STARTED
Audio volume
The fourth step in the Set-up wizard is to
adjust audio volumes:
1. Adjust the keypad tone volume with the
arrow buttons.
2. The sound volume can be tested using the
Test button.
3. Adjust the Alert tone volume with the arrow
buttons.
4. The sound volume can be tested using the
Test button.
5. Accept by choosing Next .
Power save
Adjust the power save time to reduce power con-
sumption when the instrument is being powered
from the battery pack. A lower time increases the
operation time.
1. Choose the time after which the QuikRead go
instrument will enter sleep mode (hibernate).
2. Choose the functionality of the sleep mode.
In Full standby QuikRead go will enter the
sleep mode and turn off the backlight of the
display after the time specified. In the Close
lid only mode only the lid will be closed.
Finishing the Set-up wizard
You have now completed the Set-up wizard.
You may start using the instrument or continue
making additional settings in
Advanced Set-up,
which takes you to Measurement flow where
you can adjust laboratory- or work-routine ori-
ented settings.
OK Cancel
PERSONAL SETTINGS :: POWER SAVE
Settings
Hibernate after:
20 min
Close lid only
Hibernate functionality:
Adjust power save time to save power consumption. Lower time
increases reader operation time on accu use.
12:20