Oricom MX1100G, Инструкция по эксплуатации

Страница: 33 / 49

29
4.
Press softkey [
] to send the Position Reply call.
5.
Press softkey [
], and then press [ ] to return to the operating
screen.
■
■
Test Call
You should avoid testing calls on the specific DSC distress channels and safety
calling channels. When you cannot avoid testing on a distress or safety channel,
you should indicate that these are test calls. Normally the test call would require no
further communication between the two stations involved.
■
◆
Sending a Test Call
1.
Press softkey [
], the “OTHER DSC” screen is displayed.
NOTE: You can also display the “OTHER DSC” screen by selecting the “DSC
Call” item on the Menu screen.
2.
Select “Type”, then press [OK] , “MESSAGE TYPE” is displayed. Select “Test”,
then press [OK] or softkey [
].
3.
Select “Address”, and then press [OK] .
4.
Select a station to send the Test call to.
NOTE: You can also select “Manual Input” to manually enter the calling station.
5.
Press softkey [
] to send the Test call, “Transmitting Test Call” is dis
-
played.
NOTE: If Channel 70 is busy, the radio stands by until the channel becomes
clear.