24
Programming
CAUTION: The batteries are the only source of power used to
operate your thermostat. If you do not replace the batteries, the
display will dim and your system will operate on the last
programmed temperature or the factory default.
NOTE: If you plan to be away from the premises more than 30
days, we recommend that you replace the old batteries with new
alkaline batteries prior to leaving.
5
Permanent Manual Override
SET TEMP
HOLD TEMP
PM
SA
2
TEMP
HOLD
CLEAR
HOLD
CLEAR
In the event you wish to hold
your manual override for
vacation or just an extended
period of time, follow the
temporary manual
override instructions on
page 23, then immediately press
HOLD/CLEAR.
This will maintain override
setting indefinitely. “HOLD” will
appear on the display.
To return immediately to the current
program, press HOLD/CLEAR until
program number
appears. “HOLD” will
disappear if you were in
permanent manual override.
(*From temporary or permanent manual
override state)
NOTE: You can also return the current
program by pressing “HOLD TEMP”
once in permanent override mode.
To Return To Program*
55 72
9:1 5 55
HOLD
CLEAR
HOLD
CLEAR
