8
This thermostat comes with two #8 slotted screws and two wall anchors for mounting. To
install your unit, you should have the following tools and materials.
Small slotted screwdriver
Hammer
Electric drill and 3/16” bit
Two 1.5V (AA) Size Alkaline batteries
What You Need
Reviewing Programs
PM
SA
AM
TEMP
PROG
You may want to review the programs to see that the settings are correct.
Continue pressing
to review programs.
Normal display of current time,
temperature, and day of week.
1st weekday program is displayed.
Program indicator (1) appears.
M to F indication appears.
PROG
NOTE: The temperatures you have entered will NOT take effect immediately, but at the
next program time change. The thermostat is pre-set to 68°F.
If you want a temperature other than 68°F, you must use the manual override feature
described below to enter the temperature you want. When your entered program
becomes effective, the corresponding program number will appear on the display.
After programming, confirm the new programs by pressing
If you are programming the thermostat while it is disconnected from the system, move the
customer choice switch to the off position before reinstalling the thermostat.
PROG
M T W TH F
1
9:1 5 72
6:00 68
Weekday
Programs
21
Installation
