20
Programming
Snap open the wallplate from your thermostat by pressing the release tab on the bottom of
the thermostat.
Position wallplate on wall and pull wire with RJ45 connector and any additional wires through
large opening. Then level for appearance. Mark holes for plastic anchors provided.
Drill holes with 3/16” bit and gently tap anchors into the holes until flush with wall.
Reposition wallplate to wall, pulling wires through large opening. Insert mounting screws
provided into wall anchor and tighten. (See Figure 1.)
Mount Wallplate & Thermostat
Figure 1
1
2
3
4
5
9
PROG
DAY
PROG
DAY
Similarly
T
W
T is selected.
W is selected.
Display the day to be programmed and use
HOUR
MIN
PROG
to enter programs.
NOTE: Another approach to programming is to first program all weekdays M
through F and SA and SU as same programs. Then, display and change the
programs of only those days which will have different programs.
NOTE: If program time remains 0:00, that particular program will not be
effective; e.g., if Program #2 has time 0:00, the thermostat will jump from
Program #1 to Program #3.
Individual Day Programming
(Continued)
