60
SoundDrive 16 User's Manual
Appendix A: Technical Help
the software application for Sound Blaster, the
software application may omit digitized sound if
there is not enough base memory available.
Symptom 5
I cannot access the CD-ROM drive.
Check
1. Verify that the FDCD.SYS device driver (or
other CD-ROM device driver) is loaded in the
CONFIG.SYS file. Verify that the MSCDEX or
CORELCDX.COM device driver is loaded in
the AUTOEXEC.BAT file.
2. Verify that the path and syntax for each of the
device driver lines are correct (refer to Chapter
1: "Device Drivers").
3. If there is a LASTDRIVE statement in the
CONFIG.SYS file, verify that the drive letter
used is set to a letter after the CD-ROM drive
(refer to your DOS manual for more informa-
tion).
4. Verify that the colored stripe on ribbon cable is
correctly installed on Pin 1 on both the
SoundDrive 16 and the CD-ROM drive.
Symptom 6
My CD-ROM drive does not play CD Audio.
Check
1. Verify that the audio cable used matches the
pin-outs for the CD Audio connector. See Ap-
pendix A for the CD-ROM Audio Cable Con-
nector pin assignments. Contact your CD-
ROM manufacturer for the appropriate audio
cable. The SoundDrive 16 has an MPC-2 audio
connector.
Содержание SoundDrive 16
