Orchid SoundDrive 16, Руководство пользователя

Страница: 18 / 84

16 SoundDrive 16 User's Manual
Chapter 1: Hardware and Software Installation
External Devices
External Speakers
You can connect 4 or 8 ohm external speakers or
headphones to SoundDrive 16. The speakers and
headphones plug into the SPEAKER jack on the
SoundDrive 16 metal bracket.
Joystick
Plug the joystick into the 15-pin connector on the
metal bracket.
MIDI
If you purchased the optional MIDI interface kit, you
will have an additional cable. This cable plugs into
the 15-pin connector and provides MIDI IN and
MIDI OUT connections, in addition to a joystick
connection. Connect this cable to the joystick port
and connect any MIDI devices to the appropriate
cables.
See Figure
1.7 for the
connection
locations of
the external
devices.
Jumper JP5: SoundDrive 16 I/O Address
Jumper JP5 sets the base I/O port address for Sound
Blaster mode. The default setting is 220Hex.
1 2 3
Figure 1.6: Jumper JP5 (pins 2
and 3 connected).
Default address
Position the jumper connector across Pins 1 and 2 of Jumper
JP5 to enable address 240Hex.