14
SoundDrive 16 User's Manual
Chapter 1:
Hardware and Software Installation
Jumper Settings
The following table lists the jumpers used in the
configuration of SoundDrive 16. The information
following the table explains the jumpers in more
detail.
Jumper JP1: SCSI Memory Address Segment
If you do not have the optional SCSI chip installed on your
SoundDrive 16, you can ignore this jumper setting. This
jumper sets the memory address for the SCSI inter-
face. The default address is OFF, which configures
for memory address CA000. The address ranges
used are CA000-CBFFF, C8000-C9FFF, CE000-CFFFF,
or DE000-DFFFF.
Jumper
Setting
Default
Function
JP1
No Connection
✔
Set SCSI address - CA000
(SCSI Memory
Connect option 1
Set SCSI address - C8000
Segment)
Connect option 2
Set SCSI address - CE000
Connect
1 & 2
Set SCSI address - DE000
JP2
No Connection
✔
No Interrupt Used
(CD-ROM/SCSI
Connect option 1
Set Interrupt 5
IRQ)
Connect option 2
Set Interrupt 7
Connect option 3
Set Interrupt 10
Connect option 4
Set Interrupt 11
JP4
No Connection
✔
Set Mitsumi I/O Address - 360H
Connect option 1
Set Mitsumi I/O Address - 320H
Connect option 2
Set Mitsumi I/O Address - 340H
Connect
1 & 2
Set Mitsumi I/O Address - 310H
JP5
Connect
1 & 2
Enable I/O address 240
(SoundDrive 16
Connect
2 & 3
✔
Enable I/O address 220
I/O Address)
Table 1.1: Summary of Jumper Settings
For help on
avoiding
address
conflicts, see
Appendix A.
Figure 1.2: Jumper JP1 (no
connection).
Default address
1
2
Содержание SoundDrive 16
