Orbotech Symbion S36, Руководство программиста

Страница: 18 / 128

© Orbotech 2005 Symbion™ Programmer Guide 11
Draft - Confidential
•
Graphic Editing of position
With the tool enabled click a component to select, hold over the center
marker and drag to move the component.
Holding the Ctrl key whilst making the move operation provides
options for Global movement
A second click on the component center marker changes the function to
rotation. To rotate the component hold over the handles and drag.
Normally the rotation tool operates in 15° steps. Holding the Ctrl
key while rotating a component permits free rotation
•
Graphic Editing of component and land dimensions
With the tool enabled click to select a component, drag handles to adjust
the current dimension. Click the handles to change the dimensions being
set.
The resize tool operates on the following dimensions, cycling
through in the following order
Body
→
Terminal
→
Land
•
Measurement
With the tool enabled hold to start measuring and drag over the object to
be measured. The tool reads out the length measured, its individual X and
Y components and the angle.
This tool also provides brightness measurement, when not using
the measurement functionality
Holding the
Ctrl
key while using the measure tool will display
the current Height of the ROI this is useful for checking Height
Synchronization
•
/ Zoom in / out
Click to zoom in or out by one step.
You can also use the
+
and
–
keys on the numeric keypad to
zoom. When no component is selected, the zoom operates on
the cursor location
•
Zoom to fit
Click to zoom the selected component to the maximum level, allowing the
whole component to fit in the display.
You can also use the
/
key on the numeric keypad to zoom to fit