Orbotech Symbion S36, Руководство программиста

Страница: 128 / 128

© Orbotech 2005 Symbion™ Programmer Guide 121
Draft - Confidential
Flash Level Adjustment
The Flash Level Adjustment checks the output of the flashes, and adjusts the
outputs if necessary.
This check is automatic and uses the grey area on the test card.
•
Click
•
Click Yes to confirm warming up the flashes before the check
It is recommended always to warm up the flashes before any
check, this process takes two and a half minutes.
When the check is completed the date is refreshed and colored for the result.
A failing check will show a cross in the button.
If the check fails it may be necessary to replace one or more
flash tubes, refer to
Service Manual
Grid Adjustment
The Grid Adjustment checks the motion of the machine with respect to the
optical head, this creates a geometric correction.
This check is automatic and uses the cross on the test card.
•
Click
The Adjustment will take approximately 10 minutes; the system
should be undisturbed in this time.
When the check is completed the date is refreshed and colored for the result.
A failing check will show a cross in the button.
If the check fails it may be necessary to make a calibration of
the optical head, refer to
Service Manual