Orbotech Symbion S36, Руководство программиста

Страница: 107 / 128

100 Symbion™ Programmer Guide © Orbotech 2005
Draft - Confidential
•
The Miniboard size should be defined for the single image.
If it is necessary to change the Miniboard size follow the instructions
below.
o
Select the
Miniboard
(graphically or in the Recipe Editor)
o
Select the Resize Tool
o
Drag the Board handles to the first Miniboards
•
Optionally the Miniboard shape can be defined for the single image.
Defining the Miniboard shape will have no effect on the system
performance. It does improve the clarity of the display of defect
information to the Repair Operator.
To define the Miniboard shape follow the instructions below.
o
Select the Miniboard (graphically or in the Recipe Editor)
o
Select the Resize Tool
o
Click on the Resize handles to change to Polygon Mode
Polygon mode is indicated when the handles are at the corners
of the Miniboard frame.
o
Right Click at any location where you wish to add a point to the
polygon and choose ‘Add Vertex’
A Vertex is a point where two lines forming a polygon meet.
o
Any Vertex may be repositioned by clicking and dragging to the
desired location.