Unpacking the System
Unpacking and Mounting
4-2
Ocean TRx™ 4500 Installation and Operations Manual
ATTENTION!!
Two people are required for the ADE unpacking and mounting
procedures.
(In most cases), the following procedures are the responsibility of the shipyard:
Preparing for the attachment of Orbit’s Base Ring to the Radome support
Installing the ADE/BDE cables and wiring
Installing and connecting the modem.
NOTE:
The remaining installation process is the responsibili
ty of Orbit’s authorized technicians
4.1
Unpacking the System
NOTE:
It is recommended to save the packaging. Use only the original packaging when transporting
the OceanTRx
TM
4-500
system from one location to another. Any other packaging may cause damage
to the system, and will not be covered by the warranty.
4.1.1
Crate Dimensions
The OceanTRx
TM
4-500 system is packed in a single wooden crate with the following
dimensions:
Length:
1.91m (75.2”)
Width:
1.91m (75.2”)
Height:
1.98m (78”)
1. Wooden Platform
2. Cardboard
Sleeve
3. Box Cover
4. Radome
Figure
4-7: Shipping Crate