Configuring the Restart Mode
System Operation
8-28
Ocean TRx™ 4500 Installation and Operations Manual
8.6.1.3
BUC Attenuation Control Capability
Atten
– This button opens the
BUC Attenuator
dialog box, which is used to define the
attenuator control capability of the Orbit-certified
BUC
units.
Figure
8-25: BUC Attenuator Dialog Box
8.7
Configuring the Restart Mode
By default, the system automatically enters Acquire mode after it restarts. You can
change the default setting to a different operating mode, for purposes of installation,
integration or maintenance.
To set the default restart mode:
1. From the
Operation Screen
, open the
Config
menu and select
Operating Modes
.
2. Select
Restart
from the
Operating Modes
sub-menu. The
Restart Mode
dialog box
appears.
Figure
8-26: Restart Mode Dialog Box
3. Open the
Restart to
drop-down list and select one of the following values:
Stand-by
– Halts the axes in their current position.
Acquire
– Initializes the
IMU
and axis encoders, activates Acquire Mode (see
).
Slave
– Puts the system on call for commands from an external ‘Master’ controller.
Enc Init
– Initializes the axis encoders.
Test Traj
– Initializes the axis encoders and moves all axes on their test
trajectories (see
AcqSatPreset
– Activates Acquire Satellite Preset Mode (see
AcqPrTrack –
Activates Acquire Program Track Mode (see
