System Operation
Configuring the Cease Tx Function
OceanTRx
TM
4-500 Installation and Operations Manual
8-25
Figure
8-22: Host Hardware Interface GPS Output Tab
3. Open the
GPS Output
tab and set the following parameters:
Enable
=
Yes
.
COM Port Number
=
3
.
4. The other parameters in the dialog box reflect the NMEA-0183 standard. If necessary,
change the following parameters as appropriate for your particular satellite modem:
Baud Rate
Format
NMEA – Device
NMEA – Sentence
Send Interval, sec.
Suppress milliseconds
Force Genocidal Separation to 0
5. Click
OK (Enter)
. The
Host Hardware Interface
dialog box closes.
8.6
Configuring the Cease Tx Function
The Cease Tx function allows you to define the conditions under which the system
automatically interrupts transmission to the satellite (for example, when the antenna is
pointing towards a predefined blockage zone).
Configuring this function is under the customer’s responsibility. Follow the instructions
below and consult with Orbit’s Service Department for further assistance.
The default setting is control AUTO –
