Orban OPTIMOD-FM 5700i, Руководство по эксплуатации

Страница: 78 / 335

2-22
INSTALLATION ORBAN MODEL
You have now completed the guided Quick Setup procedure and are in
the normal
Recall P
RESET
screen. However, if your country requires you
to comply with the multiplex power ceiling specified in ITU-R BS412-9,
you will also need to set up the 5700i’s Multiplex Power Controller by fol-
lowing the instructions in step 1 on page 2-23.
13. Choose a processing preset.
[If you are setting up the 5700i for use as a stand-alone stereo encoder, skip this
step.]
A) Turn the knob until your desired preset is visible in the lower line of the dis-
play.
B) Press the Recall Next button to put your desired preset on-air.
This step selects the processing to complement the program format of
your station.
After this step, you can always select a different processing preset, pro-
gram the 5700i to automatically change presets on a time/date schedule,
use a GPI input to trigger preset changes, modify presets to customize
your sound, and store these presets as User Presets.
Preset names are just suggestions . Feel free to audition different presets
and to choose the one whose sound you prefer. This preset may have a
very different name than the name of your format. This is OK.
You can easily modify a preset later with the 5700i’s one-knob L
ESS
-M
ORE
feature. Refer to Section 3.
Congratulations! You are now on the air with your initial sound. Feel free to
read the material in Section 3 of this manual, which describes the various presets
and how you can customize them to achieve your desired signature sound.
14. Complete Station ID (optional).
The Station ID is an optional setting that you can provide to associate the 5700i
with the station providing the program material (e.g., “Z-100”). The name can be
up to eight characters long. It is used to identify your 5700i to Orban’s PC Re-
mote application, and appears on the Main Screen when the 5700i is being con-
trolled by the PC Remote application.
A) Navigate to Setup > Next > T
IME
D
ATE
A
ND
ID > S
TATION
ID .
B) Use the knob to set the each character in the ID. Use the
Next
and
Prev
but-
tons to control the cursor position.
C) When finished entering your name, press the
SAVE
button. If you escape to
the main screen from Setup, you can now see the station name toggle on the
main screen.
The following steps are not included in Quick Setup, but you may need to perform
them as part of your initial setup of the 5700i.