Orban OPTIMOD-FM 5700i, Руководство по эксплуатации

Страница: 34 / 335

1-8
INTRODUCTION ORBAN MODEL 5700i
Factory Presets
The Factory Presets are our “factory recommended settings” for various program
formats or types. The description indicates the processing structure and the type of
processing. Each Factory Preset on the Preset list is really a library of more than 20
separate presets, selected by navigating to
Modify P
ROCESSING
> L
ESS
-M
ORE
and us-
ing the L
ESS
-M
ORE
control to adjust OPTIMOD-FM for less or more processing. The
factory presets are listed and described starting on page 3-20.
Factory Presets are stored in OPTIMOD-FM’s non-volatile memory and cannot be
erased. You can change the settings of a Factory Preset, but you must then store
those settings as a User Preset, which you are free to name as you wish. The Factory
Preset remains unchanged.
To select “audio processor mode” or “stand-alone stereo encoder mode,” recall a
Factory or User Preset that uses this mode. Starting with V1.1 software, the 5700i
will automatically cross-fade between modes. Note that an audio mute will still oc-
cur when switching to and from a “UL” (ultra-low-latency) preset because this also
requires DSP code to be reloaded.
User Presets
User Presets permit you to change a Factory Preset to suit your requirements and
then store those changes.
You can store more than 100 User Presets, limited only by available memory in your
5700i (which will vary depending on the version of your 5700i’s software). You can
give your preset a name up to 18 characters long.
User Presets cannot be created from scratch. You must always start by recalling a
Factory Preset. Make the changes and then store your modified preset as a User Pre-
set. You can also recall a previously created user preset, modify it, and save it again,
either overwriting the old version or saving under a new name. In all cases, the
original Factory Preset remains for you to return to if you wish.
User Presets inherit the structure of their parent Factory Presets (Five-Band, Two-
Band, Ultra-Low-Latency Five-Band, or Stand-Alone Stereo Encoder). The
only way
you can choose the structure of a User preset is to edit it from a Factory preset hav-
ing that structure (or to edit it from an older User Preset having the desired struc-
ture). You cannot change the structure that an existing User Preset uses.
User Presets are stored in non-volatile memory that does not require battery back-
up.
To Create or Save a User Preset on page 3-17 has more about User Presets.