Orban OPTIMOD-FM 5700i, Руководство по эксплуатации

Страница: 277 / 335

OPTIMOD-FM DIGITAL TROUBLESHOOTING
5-11
you already set this speed when you configured your PC ports, you
shouldn’t have this problem.
The 5700i communicates at 115200 bps. COM ports on some older PCs are
incapable of communications at this rate and may not work reliably.
Most newer PCs use 16550-compatible UARTS, which support the 115200
bps rate.
If you do see this warning message, you can reset the Maximum BPS
Speed by accessing
P
ROPERTIES
for the connection:
a) Click
S
TART
> P
ROGRAMS
> A
CCESSORIES
> C
OMMUNICATIONS
> N
ETWORK AND
D
IAL
-
UP
C
ONNECTIONS
.
b) Right click the name of your connection and access “ P
ROPERTIES
.”
c) Go to the “ G
ENERALS
”
TAB
and select the “ C
ONFIGURE
” button.
d) Set the M
AXIMUM
S
PEED
(
BPS
) to 115200 .
e) Select OK and try your connection again.
T) If you see: “Error 619: The specified port is not connected.”
Make sure the I
NTERFACE
T
YPE
on the 5700i is correct:
a) On the 5700i, go to Setup > Network & Remote > Pc Connec.
b) Set
PC C
ONNECT
to
D
IRECT
.
c) Try your connection again.
Troubleshooting Windows 2000 Modem Connect:
If you are having trouble establishing a connection, check your New Connection’s
properties to make sure they are set up correctly:
A) Click “Start > Programs > Accessories > Communications > Network and Dia-
lup Connections” to bring up the Network Connections screen.
B) In the “Network Connections” window, right-click “Optimod 5700i - Modem”
and choose “Properties.”
C) The “Properties” window opens for “Optimod 5700i – Modem”.
D) Click the “Properties” button.
E) Select the “General” tab and make sure that “Connect Using” displays the
correct modem and port.
F) Click the “Configure…” button.
G) Set the “Maximum Speed (bps) to 115200.
H) Check the “Enable hardware flow control,” make sure all other hardware fea-
tures are unchecked. Then click “OK.”
I) Click the “Networking” tab on the “Properties” window.