Orban OPTIMOD-FM 5700i, Руководство по эксплуатации

Страница: 182 / 335

3-18
OPERATION ORBAN MODEL 5700i
Some non-alphanumeric characters (such as < and >) are reserved and
cannot be used in preset names.
D) Use the knob to set the each character in the preset name. Use the Next and
Prev
buttons to control the cursor position.
E) Press the
S
AVE
C
HANGES
button.
•
You cannot give a user preset the same name as a factory preset. If the name
that you have selected duplicates the name of a factory preset, the 5700i will
suggest an alternate name.
•
If the name you have selected duplicates the name of an existing user preset, the
5700i warns you that you are about to overwrite that preset. Answer Y
ES
if you
wish to overwrite the preset and N
O
otherwise. If you answer N
O
, the 5700i will
give you an opportunity to choose a new name for the preset you are saving.
You can save user presets from the 5700i PC Remote application. (See Using the
5700i PC Remote Control Software on page 3-80.) Please note that when you
save presets from the PC Remote application, you save them in the 5700i’s mem-
ory (as if you had saved them from the 5700i’s front panel). The PC Remote ap-
plication also allows you to
archive presets to your computer’s hard drive (or
other storage device) and to restore them. However, archiving a preset is not the
same as saving it. Archived presets reside on a storage medium supported by
your computer, while saved presets reside in the 5700i’s local non-volatile mem-
ory. You cannot archive a preset until you have saved it. (See
To back up user
presets, system files, and automation files onto your computer’s hard drive on
page 3-83.)
Note that if, for some reason, you wish to save an unmodified preset (ei-
ther Factory or User) under a new name, you must temporarily make an
arbitrary edit to that preset in order to make the
S
AVE
P
RESET
button ap-
pear. After you have saved the preset, reverse the edit and save the pre-
set again.
About the Processing Structures
If you want to create your own User Presets, the following detailed discussion of the
processing structures is important to understand. If you only use Factory Presets or if
you only modify them with
L
ESS
-M
ORE
, then you may still find the material interest-
ing, but it is not necessary to understand it to get excellent sound from the 5700i.
In the 5700i, a processing structure is a program that operates as a complete audio
processing system. Only one processing structure can be on-air at a time. Just as
there are many possible ways of configuring a processing system using analog com-
ponents (like equalizers, compressors, limiters, and clippers), 5700i’s DSP hardware
can realize several possible processing structures. Unlike an analog system, where
creating a complete processing system involves physically wiring its various compo-
nents together, the 5700i realizes its processing structures as a series of high-speed
mathematical computations made by Digital Signal Processing (DSP) integrated cir-
cuit chips. In the 5700i, both structures operate simultaneously so there is no delay
in switching between them, which is done with a smooth cross-fade.