Orban OPTIMOD 6300, Руководство по эксплуатации

Страница: 81 / 255

OPTIMOD 6300 DIGITAL INSTALLATION
2-33
B) Turn the knob until you see the passcode you want to edit.
C) Press the N
EXT
button. The Permissions screen appears.
D) Turn the knob to set the desired permission level for the passcode you are ed-
iting.
E) Press the N
EXT
button to confirm your choice.
Your new permission level is stored and the Security menu appears.
To Delete a Passcode:
A) Navigate to S
ETUP
> S
ECURITY
> D
ELETE
P
ASSCODES
.
If the front panel is already password protected, you can only access this
screen by entering a passcode with All Access privileges.
B) Turn the knob until you see the passcode you want to delete.
C) Press the N
EXT
button. The Confirm Delete screen appears.
D) Press the Y
ES
soft button to delete the passcode. Press the NO or ESCAPE
buttons to abort deleting the passcode.
To Lock the Front Panel Immediately:
After you have adjusted the processor, to maximize security you will often want
to lock it immediately without waiting for the timeout. To do so:
A) Press the S
ETUP
button.
B) Press the L
OCK
N
OW
soft button.
To Program local lockout:
A) Navigate to
S
ETUP
> S
ECURITY
.
If the front panel is already password protected, you can only access this
screen by entering a passcode with
A
LL
A
CCESS
privileges.
B) Hold down the A
UTOLOCK
soft button and turn the knob to set the desired
lockout time (if any).
You can program the lockout delay time (in hours:minutes) from 15 min-
utes to 8 hours, or
O
FF
. This is the time delay between the last access to a
local front panel control and when the front panel automatically locks it-
self out, requiring entering a passcode to obtain front panel control of
the 6300.
Autolock can only be turned on if at least one passcode exists with
A
LL
A
CCESS
privileges because an
A
LL
A
CCESS
passcode is required to fully
unlock the panel or to turn off the Autolock function.
C) Press the E
SCAPE
button to leave the Security menu.