Orban OPTIMOD 6300, Руководство по эксплуатации

Страница: 77 / 255

OPTIMOD 6300 DIGITAL INSTALLATION
2-29

AES Input Error : Indicates that the 6300's AES input receiver chip has de-
tected that the input data is unusable. When the chip detects such an error,
it automatically switches the in-put to ANALOG.

No Function : Tally output is disabled.
C) Program tally output #2 if you wish, following the procedure in step (B) above
with the
T
ALLY
O
UT
2 button.
Automation Using the 6300’s Internal Clock
1. If you have not already done so, set the system clock.
[You can also set the clock automatically via PC Remote or the Internet. See
Synchronizing Optimod to a Network Time Server starting on page 2-38.]
A) Navigate to S
ETUP
> N
EXT
> T
IME
D
ATE
A
ND
ID > S
ET
T
IME
.
a) Set hours and minutes.
b) Enter seconds slightly ahead of the correct time.
c) Wait until the entered time agrees with the correct time. Then press the
E
NTER
T
IME
button to set the clock.
B) Press the
S
ET
D
ATE
button.
a) Set today’s date, using the days, month, and year buttons.
b) Press the
E
NTER
D
ATE
button.
C) Press the D
AYLIGHT
T
IME
button.
a) Using the Daylight Saving ( DT M
ONTH
and DT W
EEK
) buttons, set the month
and week when Daylight Saving Time (Summer Time) begins, or
O
FF
.
b) Using the Standard Time (
ST M
ONTH
and
ST W
EEK
) buttons, set the month
and week when Daylight Saving Time (Summer Time) ends.
Note that setting DT M
ONTH
,
DT W
EEK
,
ST M
ONTH
, or ST W
EEK
to O
FF
will
defeat Daylight Time functionality.
c) Press the Escape key to back out of the daylight saving screen.
D) (Optional) Press the S
TATION
ID button to specify your station’s identifier (call
sign or call letters).
a) Use the knob to select characters. Use the
P
REV
and
N
EXT
buttons to move
the cursor.
b) When you are finished, press
S
AVE
.
2. Navigate to Setup > Next > Automation.
If the A
UTOMATION
button reads D
ISABLED
, hold it down and turn the knob to en-
able automation.