Oracle Acme Packet 4500, Руководство по установке и обслуживанию оборудования

Страница: 79 / 114

MAINTENANCE
Acme Packet 4500 Hardware Installation and Maintenance Guide 73
To force a Acme Packet 4500 into the standby HA state:
1. Confirm that the relevant systems on SBC1 and SBC2 are synchronized with the
show health command. Type show health and press <Enter> on each system.
NETNETSBC1# show health
Media Synchronized true
SIP Synchronized true
MGCP Synchronized true
H248 Synchronized disabled
Config Synchronized true
Collect Synchronized disabled
Radius CDR Synchronized disabled
Rotated CDRs Synchronized disabled
Active Peer Address 0.0.0.0
Redundancy Protocol Process (v3):
State Active
Health 100
Lowest Local Address 169.254.1.1:9090
1 peer(s) on 2 socket(s):
SML-STIC-45002: v3, Standby, health=100, max silence=1050
last received from 169.254.1.2 on wancom1:0
Switchover log:
Jun 25 19:03:02.029: Active to BecomingStandby
Jun 25 19:04:54.684: Standby to BecomingActive
NETNETSBC1#
NETNETSBC2# show health
Media Synchronized true
SIP Synchronized true
MGCP Synchronized true
H248 Synchronized disabled
Config Synchronized true
Collect Synchronized disabled
Radius CDR Synchronized disabled
Rotated CDRs Synchronized disabled
Active Peer Address 169.254.2.1
Redundancy Protocol Process (v3):
State Standby
Health 100
Lowest Local Address 169.254.1.2:9090
1 peer(s) on 2 socket(s):
SML-STIC-45001: v3, Active, health=100, max silence=1050
last received from 169.254.2.1 on wancom2:0
Switchover log:
active system
synchronized
standby system
applications
synchronized
applications
Figure 6 - 95. show health Command Output