Oracle Acme Packet 4500, Руководство по установке и обслуживанию оборудования

Страница: 95 / 114

MAINTENANCE
Acme Packet 4500 Hardware Installation and Maintenance Guide 89
4-port gigabit Ethernet copper SFP LX, SX, or Copper [1000Mbps for SX, LX;
10/100/1000Mbps CX] These three transceiver types are inserted into the NIU4500
card.
• 850nm 550m multi-mode fiber SX. Check the label on the back of the SFP for
this information to make sure you have the right mode transceiver.
• 1310nm 10km single-mode fiber LX. Check the label on the back of the SFP for
this information to make sure you have the right mode transceiver.
SFP Identification
The following images show the multi mode and single mode SFP transceivers used
in the Acme Packet 4500 NIU 4500 cards.
Black latch means the SFP is a multi
mode transceiver. SX 850 nm 550 m
multi-mode label is on the back.It uses
an orange colored fiber optic cable.
Blue latch means the SFP is a single-
mode transceiver. LX 1310 nm 10 km
single-mode label is on the back. It
uses a yellow colored fiber optic cable.
Figure 6 - 123. Identifying SFPs by Latch Color
SFP Identification
The following image shows a gigabit Ethernet copper SFP transceiver used in the
Acme Packet 4500 NIU4500 cards and uses a cat 5 or 6 Ethernet cable.
Figure 6 - 124. GbE Copper SFP