Oracle Acme Packet 4500, Руководство по установке и обслуживанию оборудования

Страница: 20 / 114

14 Acme Packet 4500 Hardware Installation and Maintenance Guide
COMPONENT OVERVIEW
System Control Panels
This section describes the Acme Packet 4500’s front and rear control panels.
Front Panel
The Acme Packet 4500’s front panel looks like this:
Figure 2 - 15. Acme Packet 4500 Front Panel
Front Control
Panel
The Acme Packet 4500’s front control panel provides easy access to several system
components. You can access the graphic display, navigation buttons, reset button,
alarm LED, alarm silence button, console port, and the USB port. The following is a
close up of the front control panel.
Console Port
Reset Button
Alarm Active LED
Navigation Buttons
Graphic Display
USB Port
Alarm Silence Button
Figure 2 - 16. Acme Packet 4500 Front Control Panel
Note: The front control panel on the Acme Packet 4500 does not flip
down. Attempting to flip down the front control panel will break it.
In addition, the system fan pack and fan filter are located behind the front panel of
the Acme Packet 4500.
Reset You reset the Acme Packet 4500 by pressing the front panel’s reset button. This
button is recessed, and can only be pressed by inserting a thin wire, such as a
paperclip, through the reset button channel. Accidentally pressing the reset button
can result in the loss of software data or your configuration.
Pressing the reset button causes a hard reset, immediately rebooting the Acme
Packet 4500. After the reset button is released, the Acme Packet 4500 begins its boot
sequence and loads the configured software file.