Oracle Acme Packet 4500, Руководство по установке и обслуживанию оборудования

Страница: 50 / 114

44 Acme Packet 4500 Hardware Installation and Maintenance Guide
SYSTEM INSTALLATION
Your rack should resemble the following image.
Figure 4 - 51. Stationary Slides and Extenders Installed in Equipment Rack
Square Hole Rack
Installation This section explains how to mount the Acme Packet 4500 mounting rail assembly
in a square hole equipment rack. You can use 10-32 cage nuts as an alternative to the
provided nut bars, but they must be mounted prior to this procedure.
To install the stationary rails on the front of a square hole equipment rack:
1. Locate the following components:
•
2 x stationary rail sections
• 4 x 10-32 x 5/8” screws
•
2 x mounting spacers
• 2 x nut bars
2. Align the painted side of the stationary rail with an appropriate mount point on
the front of the equipment rack.
Figure 4 - 52. Aligning the Stationary Rail with the Equipment Rack
3. Place 2 x 10-32 screws through the mounting spacer, through the stationary rail
ear, and through the square rack rail.
4. Hold the nut bar behind the front rack rail.