OPTOGAMA LPA-A v2 Series, Руководство пользователя

Страница: 4 / 18

1. Safety requirements
•
All safety instructions must be followed.
•
All rules and regulations concerning the safe operation of
lasers must be known and applied while installing and
operating motorised laser power attenuator.
•
Even when wearing safety glasses avoid eye contact
with direct or scattered laser light while assembling,
installing and operating the device.
•
The device should never be exposed to dirt, dust or
moisture.
•
Before any operation make sure the device is installed
correctly and well adjusted and all cover stickers are
removed.
•
Protective measures should be considered if necessary.
•
Electrical safety requirements must be complied while
operating this device.
CAUTION! High laser output power may damage or destroy
optical elements.
CAUTION! The device is meant to be used with a
collimated beam. Users take full responsibility when using
the device with a highly converging beam.
CAUTION! Before increasing laser power make sure the
device is aligned and there is no beam cut. It may damage
optical elements.
4
INPUT
COVER STICKERS MUST
BE REMOVED BEFORE USE
OUTPUT
P-pol
!
!
REFLECTED
BEAM
S-pol
Or absorbed
by beam
dump