OPTOGAMA LPA-A v2 Series, Руководство пользователя

Страница: 11 / 18

4.5.3. Main window
11
Preset buttons
Click “Edit” to add or edit
preset t values for a quick
change
Settings
Select this icon to open
calibration window to calibrate
an attenuator and change it’s
settings
Desired power value in %
Enter required power value.
Press “Enter”.
Power Slider
Move the slider to change into
required power level
Buttons for incremental
change
Click yellow button for
incremental change. Double-
click on the number to change
the increment size.
Save as preset
Save current transmitted laser
power value as preset button
in required slot.
Emergency zero
If active, the attenuator will
instantly go to minimum
position - 0%.
Desired power value in your
desired units
Enter required power value.
Press “Enter”. To enable go to
“settings”
Connection
Green
-
device is connected
Status
Green blinking - in motion
Green - target is reached
Error
Red - indicates and error. Drag
cursor here to obtain error
Reconnect
Select this icon to reconnect
the device if it is disconnected
Sliding Menu
Drag cursor here to expand
menu
Command line
Select this icon to open
command terminal window
Device selector tab
Connected device tab
About
Click to open About window
for FW upgrader and manual
Connection type
Shows device’s connection
type: RS232 or USB
Actual value
Shows actual value which is
read from absolute encoder