OPTOGAMA LPA-A v2 Series, Руководство пользователя

Страница: 12 / 18

4.6. Updating the firmware
If your device firmware version doesn’t match to software’s
firmware version while connecting to device via LPA
software you’ll be asked to update your device. If update
request pops-up, but you want to keep current firmware
and use LPA software, you must use software compatible
with that firmware version.
NOTE: Compatible software had been delivered with
device.
In order to update your device or rewrite device firmware -
USB cable must be used (update through RS232 cable is
not available).
1. Click button “Firmware Upgrader” in the About tab of
LPA software:
2. In the opened window press “ Update ” button. You will
be asked if you really want to update device:
After a warning device motors will be shut down and
update will start:
3. Update should be done in about a minute. If everything
went successfully message box like this should pop-up:
Now you’re ready to go.
12