OPTIMUM
M A S C H I N E N - G E R M A N Y
Assembly
Version 1.0.3 dated July 22, 2014
Page 21
Original operating instructions
B30 VGM
US
3.4
Installation and assembly
3.4.1 Requirements of installation site
Organize the workplace around the geared drill in accordance with local safety regulations.
INFORMATION
In order to achieve good operability and high processing accuracy as well as long durability of
the machine the place of installation should fulfill certain criteria.
Observe the following points:
The machine must only be installed and operated in dry, ventilated places.
Avoid places nearby machine causing chips or dust.
The foundation must be vibration-free and away from presses, planing machines, etc.
The foundation must be appropriate for the operation of a geared drill. Also observe the
bearing capacity and evenness of the foundation.
The foundation must be prepared in a way that eventually used cooling agent cannot
penetrate into the ground.
Protruding parts - such as stops, handles, etc. - need to be protected by the customer in a
way that nobody is endangered.
Make available sufficient space for the staff preparing the machine and the operators as well
as material transportation.
Also consider the accessibility for setting and maintenance works.
Provide for sufficient illumination (minimum value: 47 Lumens/ft², measured at the tool tip).
In case of insufficient intensity of illumination provide for additional illumination i.e. by a
separate workplace illuminator.
INFORMATION
The main power of the geared drill must be freely accessible.
Fragile goods
(Goods requiring careful handling)
Protect against moisture and humid environment
"Ambient conditions“ on page 17.
Prescribed position of the packing case
(Marking of the top surface - arrows pointing to the
top)
Maximum stacking height
Example:not stackable - do not stack a second
packing case on top of the first one.
