OPTIMUM
M A S C H I N E N - G E R M A N Y
Assembly
Version 1.0.3 dated July 22, 2014
Page 24
Original operating instructions
B30 VGM
US
3.7
Assembly guide
Img.3-4:
Assembly guide
3.8
First use
WARNING!
Endangering due to the use of inappropriate tool holders or operation at inadmissible
speeds.
Only use the tool holders (e.g. drill chucks) which were delivered together with the
machine or are offered as optional equipment by OPTIMUM.
Use the tool holders at the intended admissible speed range.
Tool holders must only be modified in compliance with the recommendations of
OPTIMUM or of the manufacturer of clamping tools.
WARNING!
Staff and equipment may be endangered if the geared drill is first used by unexpert staff.
We do not take responsibility for damage caused by incorrect commissioning.
3.8.1 Power supply
Connect the electrical supply cable.
Check the fusing (fuse) of your electrical supply according to the technical instructions
regarding the total connected power of the geared drill.
ATTENTION!
The geared drill is delivered without operating material (oil, coolant). First fill in oil and
coolant.
"Oil level of the gear area in the drilling head“ on page 40
Fixing (3)
