OPTIMUM
M A S C H I N E N - G E R M A N Y
Safety
Version 1.0.3 dated July 22, 2014
Page 11
Original operating instructions
B30 VGM
US
1.6
User positions
The user must stand in front of the geared drill.
INFORMATION
The main plug of the geared drill must be freely
accessible.
Img.1-1:
User positions
1.7
Safety measures during operation
CAUTION!
Risk due to inhaling health hazardous dusts and mist.
Depending on the material being processed and any additional dusts and mist in the
work area, conditions might impair your health.
Make sure that the generated health hazardous dusts and mist are safely removed at the
point of origin and are collected and/ or filtered from the working area. Use an
appropriate dust collection/ filter unit.
CAUTION!
Risk of fire and explosion by using flammable materials or cooling lubricants.
Take additional preventive measures in order to safely avoid health hazards before
processing flammable materials (e.g. aluminum, magnesium) or before using flammable
additives (e.g. solvents).
1.8
Safety devices
Operate the geared drill only with properly functioning safety devices.
Stop the geared drill immediately if there is a failure in the safety device or if it is not functioning
for any reason.
It is your responsibility!
If a safety device has been activated or has failed, the geared drill must only be used when
the cause of the failure has been removed,
it has been verified that there is no resulting danger for personnel or objects.
WARNING!
If you bypass, remove or override a safety device in any other way, you are endangering
yourself and other personnel working with the geared drill. The possible consequences
are
injuries or damage as a result of components or parts of components flying off at
high speed,
contact with rotating parts,
