OPTIMUM
M A S C H I N E N - G E R M A N Y
Safety
Version 1.0.3 dated July 22, 2014
Page 13
Original operating instructions
B30 VGM
US
1.10
EMERGENCY-STOP button
CAUTION!
After actuating the EMERGENCY-STOP
button, the drill spindle will turn for a
few seconds more, depending on the
previously selected speed.
Img.1-2:
EMERGENCY-stop button
1.11
Main switch
In the "0" position, the lockable switch can
be protected with a padlock against unau-
thorized or accidental activation.
When the main switch is off, the power
supply to the motor is cut off.
Img.1-3:
Main switch
Points marked with the pictogram shown here are not included. These points may be live even
when the main switch is off.
1.12
Drilling table
The drilling table is equipped with T-slots
for clamping blocks.
WARNING!
Risk of injury due to parts flying off at
high speed. Securely fix the workpiece
on the drilling table.
Img.1-4:
Drilling table
EMERGENCY-stop
button
Main switch
Seat for T-slot nuts
( 14 mm )
