OPTIMUM
M A S C H I N E N - G E R M A N Y
Safety
Version 1.0.3 dated July 22, 2014
Page 16
Original operating instructions
B30 VGM
US
1.17.1 Mechanical maintenance work
Remove all protection and safety devices before starting maintenance work and re-install them
once the work has been completed, such as:
Covers,
Safety indications and warning signs,
Earth (ground) cables.
If you remove protection or safety devices, refit them immediately after completing the work.
Check if they are working properly!
1.18
Accident report
Inform your superiors and SDL Industries immediately in case of accidents, possible sources of
danger and any action which almost lead to an accident "Near misses".
"Near misses" may have many possible causes.
The sooner they are notified, the faster these causes can be eliminated.
1.19
Electrical system
Have the machine and / or the electrical equipment checked regularly, at least every six
months.
Eliminate immediately all defects such as loose connections, defective wires, etc.
A second person must be present during work on live components, to disconnect the power in
case of an emergency.
Disconnect the geared drill immediately if there is a malfunction in the power supply!
